pibot_cnc_laser_series:v496_pro:check_jumpers:start
差别
这里会显示出您选择的修订版和当前版本之间的差别。
| 两侧同时换到之前的修订记录前一修订版 | |||
| pibot_cnc_laser_series:v496_pro:check_jumpers:start [2025/11/18 17:07] – [Check Point 2] admin | pibot_cnc_laser_series:v496_pro:check_jumpers:start [2025/11/18 17:08] (当前版本) – [The result shows] admin | ||
|---|---|---|---|
| 行 25: | 行 25: | ||
| * Switch on power | * Switch on power | ||
| - | ====The result shows==== | + | ====The result |
| * 5V power indicator LED should illuminate | * 5V power indicator LED should illuminate | ||
| * OLED screen should display information/ | * OLED screen should display information/ | ||
pibot_cnc_laser_series/v496_pro/check_jumpers/start.txt · 最后更改: 由 admin