pibot_cnc_laser_series:v496_pro:check_jumpers:start
Table of Contents
List 1: Ckeck Default Jumpers and Power on
1
Initial Jumpers
💡
Only 3 jumpers by default from the factory ship
- VDD selected
3.3V - SW-VCC selected
5V - GPIO26 Fuction selected as
Relay output
2
Module Insert
- Insert Antenna
- Insert OLED (optional)
- Insert TF Card (optional)
3
Power On
- Connect
12V or 24Vpower to Vmot-main - ⚠️ Do not reverse polarity
- Default: 24V recommended
- Switch on power
Expected Results
- 5V power indicator LED should illuminate
- OLED screen should display information/data (if installed)
Image shows
Coming soon!
Video demonstrations
Coming soon!
Related YAML code
pibot_cnc_laser_series/v496_pro/check_jumpers/start.txt · Last modified: by admin